TORCH ACCESSORIES |
|
TORCH MOUNTED GRAPHITE PADS. Graphite marvering pad fastens to the top of the
torch near the flame. A small lip on the back edge holds small items on top of the graphite surface and another lip located at the bottom and to the front of the graphite is very close to the flame and works
as a pre-heater for such things as millefiori. It also aids in making square or rectangular beads. Frees your hands to work the glass. |
|
CODE |
ITEM |
Price |
P-BUMINPAD |
Graphite Pad - Minor, 3x2 |
22.00 |
P-BUHOTPAD |
Graphite Pad - Hot Head, 3x2 |
22.00 |
P-BUNATPAD |
Graphite Pad - National 3x2 |
22.00 |
P-BUDELPAD |
Graphite Pad - Delta 3x2 |
22.00 |
P-BUMIDPAD |
Graphite Pad - Midrange 3x2 |
22.00 |
P-BUMAJPAD |
Graphite Pad - Major 3x2 |
23.00 |
P-BUSSQPAD |
Graphite Pad - SSQ 3x2 |
22.00 |
P-BUSTRPAD |
Graphite Pad - Starfire 3x2 |
22.00 |
P-BUCARPAD |
Graphite Pad - Carlisle 3x2 |
22.00 |
P-BUSTRWRI |
Graphite Pad w/rest Starfire 3x3 |
35.00 |
| |
|
|
OXYGEN REGULATOR |
|
Adjustable with tank and line pressure gauges. |
|
CODE |
ITEM |
Price |
P-REGOX |
Adjustable Oxygen Regulator |
70.00 |
| |
|
|
PROPANE REGULATOR |
|
Adjustable with tank and line pressure gauges, or preset without pressure gauges. |
|
| |
|
|
CODE |
ITEM |
Price |
P-REGPRO |
Adjustable Propane Regulator |
70.00 |
P-REGPROP |
Preset Propane Regulator |
20.00 |
| |
|
|
HOSE SET |
|
|
Twin lead flexible tubing. Grade T. Rated for all types of fuel gases and oxygen. The
12' long hose comes with standard "B" fitting on one end to connect to regulators and clean cut at the other end with hose clamps to fit on the barb connections at torch. The 10' and 25' hoses have "B"
fittings at both ends. Propane will eventually rot standard grade R welding hose. |
|
CODE |
ITEM |
Price |
P-HOSE10-14 |
10' Hose Set 1/4" ID STANDARD |
20.00 |
P-HOSE10-38 |
10'Hose Set 3/8" ID CARLISLE |
22.00 |
P-HOSE12-14 |
12-1/2' Hose Set 1/4" ID STANDARD |
23.00 |
P-HOSE12-38 |
12-1/2' Hose Set 3/8" ID CARLISLE |
30.00 |
P-HOSE12-516 |
12' Hose Set 5/16 ID MAJ |
27.00 |
P-HOSE25-14 |
25' Hose Set 1/4" ID STANDARD |
36.00 |
P-HOSE25-38 |
25' Hose Set 3/8" ID CARSLISLE |
45.00 |
P-HOSE25-516 |
25' Hose Set 5/16 ID MAJ |
41.00 |
| |
|
|
HOT HEAD TORCH HOSE SET |
|
The Hot Head Hose set allows you to connect a bulk fuel tank, such as a bar-b-que fuel
tank, to the Hot Head torch. Fuel gas (propane, MAPP or equivalent) in larger quantities is a substantial savings over the disposable bottles. See below for torch holder. |
|
CODE |
ITEM |
Price |
P-HOT5 |
5' Hot Head Hose |
19.00 |
P-HOT12 |
12' Hot Head Hose |
24.00 |
| |
|
|
HOT HEAD TORCH HOLDER/DISPOSABLE FUEL GAS BOTTLE HOLDER WITH WORK SURFACE |
For use with torches such as the Hot Head. Securely holds a small propane or MAPP gas
bottle off the front edge of your work table and allows you to adjust its height. In front of torch, on the table, is a 9" X 16" metal work surface. |
|
Stainless steel. |
|
|
CODE |
ITEM |
Price |
P-HOTWS |
Hot Head/Bottle Holder w/ Work Surface |
20.00 |
| |
|
|
FLASHBACK ARRESTORS |
|
Helps prevent reverse gas flow and flashback (flame burning back through the torch,
hose, regulator and tank) by utilizing an internal reverse flow check valve and a flame arrestor that quenches the flashback flame. Connects between regulators and hose. |
|
CODE |
ITEM |
Price |
P-FLASHAR |
Flashback Arrestors |
$45.00/pr |
| |
|
|
QUICK-CONNECTS |
|
Instantly connect or disconnect any torch without turning off the gas supply. Place
Quick-connects between the regulator or flashback arrestor and the hose. Incorporates an automatic shutoff valve which completely shuts off the gas flow when gas line is disconnected and also has an internal
reverse flow check valve. |
|
CODE |
ITEM |
Price |
P-QUICK |
Quick-Connects |
$38.00/pr |
| |
|
|
COMBINATION FLASHBACK ARRESTOR AND QUICK-CONNECT |
A flashback arrestor, a quick connect / disconnect, an automatic shutoff valve and an
internal reverse flow check valve all in a single item. Shorter and less expensive than if purchased separately. |
|
CODE |
ITEM |
Price |
P-FLASHQU |
Combination Flashback Arrestor &Quick-Connect |
65.00 |
| |
|
|
SPARK LIGHTER |
|
Spark lighters use a flint to create a spark and light your torch. You should
never have a butane lighter or even matches around the torch area. If you should accidentally touch anything hot, such as the hot end of a glass rod, to a butane lighter it could explode, matches could flare
up into a large flame. |
|
|
CODE |
ITEM |
Price |
P-SP1 |
Single Flint Spark Lighter |
2.75 |
P-SP1-REP |
Replacement Flints, 5 Pack |
1.50 |
P-SP3 |
Triple Flint Spark Lighter |
3.75 |
P-SP3-REP |
Replacement Flint for SP3, 5 Pack |
3.50 |
| |
|
|
GAS SPLITTERS |
|
Gas splitters allow you to connect more than one torch to a gas supply. The
most common splitter is the "Y" which has three ports, or connections. Its name comes from its shape. All splitters use one port to let in the oxygen or fuel gas and the other remaining ports to redistribute
the gas. It is recommended that you use a flashback arrestor between the torch and regulator. If the flashback arrestor is located between the regulator and the splitter then only one flashback arrestor per
regulator will protect the gas cylinder from a flashback reaching it from all connected torches. With the exception of the "Y" WITH VALVES, which lets you shut off individual ports, you will need to cap off
any outlet port that does not have a torch connected to it. The "Y", "T" and "CROSS" splitters have fittings on them to connect directly to the regulator or flashback arrestor. The "Hex" splitter has
fittings that connect it to the regulator or flashback arrestor with a lead hose between them. This allows you to run the gass |
|
|
Propane SPLITTERS |
|
CODE |
ITEM |
Price |
P-SPLIT-YP |
"Y", connect 2 torches, Prop |
14.00 |
P-SPLIT-YVP |
"Y" w/valves, connect 2 torches, Prop |
24.00 |
P-SPLIT-TP |
"T", connect 2 torches, Prop |
12.00 |
P-SPLIT-CRP |
"CROSS", connect 3 torches,Prop |
18.00 |
P-SPLIT-HEXP |
"HEX", connect 6 torches, Prop |
45.00 |
P-SPLIT-HEXUP |
"HEX" unssmbld connect 6 torches, Prop |
30.00 |
P-SPLIT-CAPSP |
CAPS for Splitters, Prop |
4.00 |
| |
|
|
OXYGEN SPLITTERS |
|
CODE |
ITEM |
Price |
P-SPLIT-YO |
"Y", connect 2 torches, Oxy |
14.00 |
P-SPLIT-YVO |
"Y" w/valves, connect 2 torches, Oxy |
24.00 |
P-SPLIT-TO |
"T", connect 2 torches, Oxy |
12.00 |
P-SPLIT-CRO |
"CROSS", connect 3 torches, Oxy |
18.00 |
P-SPLIT-HEXO |
"HEX", connect 6 torches,Oxy |
45.00 |
P-SPLIT-HEXUO |
"HEX" unassembled connect 6 torches, Oxy |
30.00 |
P-SPLIT-CAPSO |
CAPS for Splitters, Oxy |
4.00 |
