ILMENAU BURNERS |
|
|
The new Ilmenau burners are great for working with glass cane (rods) and tubing. Burners
come with one replaceable tip for working with tubing. Use the LOW NOISE jet set for working with solid rods. These burners are available in a propane/oxygen/air version and a natural gas/oxygen/air version.
You can adjust the burner from a pin point flame to a flame larger than the Major burner at the twist of a single dial. When working with tubing, use air in addition to gas & oxygen to make a wide, cool
flame; when working with solid rods, use only gas and oxygen. |
| |
|
|
|
Ilmenau B1/8A and B1/8 bench burner |
|
|
For use with natural gas, air & oxygen for (1/8A) or propane, air & oxygen for
(1/8). This burner has a special stabilization flame and an additional oxygen tube in the central supply line. Center jet is a multiple nozzle. Well suited for artistic & laboratory work. The flame can
be adjusted over a wide range of temperatures for working with low- or high-melting glasses. Comes with 2 single jets for tubing and 2 multi-jet low noise heads for solid cane.When operating primarily with
air, the flame must be stabilized with the addition of a small volume of oxygen. Surface mix. Code: P-BUILB18A Price: $699, Code: P-BUILB18 Price: $659 |
Ilmenau Low Noise Jet Sets AND BURNER |
|
|
CODE |
ITEM |
Price |
|
P-BUILB18SET |
Ilmenau Burner B1/8 Pro/Air/Ox w/Low Noise Jet Set |
722.00 |
|
P-BUILB16SET |
Ilmenau Burner B1/6 NatGas/Air/Ox w/Low Noise Jet Set |
722.00 |
|
| |
|
|
|
ILMENAU B1/5 BENCH BURNER |
|
|
For use with natural gas or propane, air & oxygen. Similar to the B1/8 models above,
but used for smaller glass work. Separate gas feed, for natural gas and propane with special flame stabilizing system, ensuring a good flame formation and a stable flame. With interchangeable center jets.
Optional connections are: gas & air, for natural gas and propane with a small amount of oxygen; gas & oxygen or gas & air plus oxygen. Code: P-BUILB15 Price: $529.00 |
A low noise jet set for solid glass is also available for this burner.
Code: P-BUILB15 JET Price: $149.00 |
Pedal Operated Gas Economizer |
|
|
This device is designed to minimize the consumption of fuel gas, oxygen and burning air
with the help of three valve blocks arranged side-by-side. The fuel gas block is fitted with a flame adjusting device which ensures a pilot flame even in the closed position. The economizer is
pedal-operated. By stepping on the pedal, the valves are opened and the torch is supplied with gases. The pedal clicks into place to keep the gases on for the working position. To turn the gases off, click
the foot release and the torch goes into the pilot light position. Suited for natural gas, propane and hydrogen up to 21 psi and oxygen up to 36 psi. Code: P-BUILECON Price: $499 |
Mixed Gas Tube Burner |
|
|
Made of steel tubing, three row flames. Mixing chamber can be adjusted to povide a
2" to 40" flame. Can be use with gas only or gas & air. For propane or natural gas. Available in lenghts from 200mm to 1000mm (8" to 40") Also availabe in a gas/air/oxygen model.
Code: P- BURIBB41 Price: $831 for 40" model, $749 for 32" model |
| |
|
|
|
NORTEL BURNERS |
|
|
| |
|
|
|
MINOR BURNER by Nortel |
|
|
The standard for soft glass beadmakers and small borosilicate work. The Minor Burner is
a surface mix torch and is therefore as quiet as a whisper. It can be adjusted to a reduction, neutral or oxidation flame each of which affects soft glass colors differently. Use with propane or natural gas
and oxygen. |
CODE |
ITEM |
Price |
|
P-BUMIN |
Minor Burner by Nortel |
169.00 |
|
| |
|
|
|
MID RANGE BURNER by Nortel |
|
|
This new surface mix torch has a larger flame than the Minor Burner, yet can be adjusted
down to a small flame. With its clean, wide flame range, the Mid Range Burner may soon become the new standard for beadmakers and flameworkers alike. |
CODE |
ITEM |
Price |
|
P-BUMID |
Mid Range Burner by Nortel |
299.00 |
|
P-BUMID-M |
Mid Range Burner by Nortel with Minor |
399.00 |
|
P-BUMID-N |
Mid Range Burner by Nortel with Premix |
399.00 |
|
| |
|
|
|
MAJOR BURNER by Nortel |
|
|
A minor burner mounted on top of a large surface mix burner for larger and hotter work.
Use with propane or natural gas and oxygen. A NEW Major Burner model B is also available. The model B is the same as the regular major burner, except that the large 64 fuel port bottom burner has 16 of its
ports blocked out in the center leaving 48 holes. The reason for this is that it allows the flame to have the same width as the 64 port model, while having a cleaner flame quality, and a cleaner and cooler
face at a flame length that everyone uses on the regular Major Burner. |
CODE |
ITEM |
Price |
|
P-BUMAJ-R |
Major Burner Reg, Minor Top |
399.00 |
|
P-BUMAJ-RN |
Major Burner Reg, Premix Top |
399.00 |
|
P-BUMAJ-B |
Major Burner w/Block, Minor Top |
399.00 |
|
P-BUMAJ-BN |
Major Burner w/Block, Premix Top |
399.00 |
|
| |
|
|
|
HOT HEAD TORCH |
|
|
Uses disposable MAPP or propane gas bottles. Doesn't require oxygen (and is therefore
not as hot as oxygen mix torches). Excellent beginning torch. See page 87 for the DISPOSABLE FUEL GAS BOTTLE HOLDER WITH WORK SURFACE and |
| |
|
|
|
HOT HEAD TORCH HOLDER WITH WORK SURFACE accessory. |
CODE |
ITEM |
Price |
|
P-BUHOT |
Hot Hear Torch |
30.00 |
|
| |
|
|
|
RANGER HAND TORCH BY NORTEL |
|
|
This is a nice surface mix torch for off-hand glass blowing. Good for heating small
pieces of glass or small areas on glass. Has a small, concentrated, very hot & clean flame. It is the same as the Minor Burner listed above in a hand held version. Code:P-BUMIN-H Price: $179.00
|
| |
|
|
|
8X8 ROW MULTI MIX HAND TORCH BY NORTEL |
|
|
This is a larger version of the Ranger Burner listed above. Same as the Major
Burner in a hand held version. For off-hand glass blowing. Good for heating larger pieces of glass such as dichroic or for heating larger areas of glass. Has a larger, concentrated, very hot & clean
flame. Code: P-BUMAJ-H Price: $279.00 |
|
| |
|
|
|
National Torches by Premier |
|
|
NATIONAL 3A-B TORCH |
|
|
Premix. Hand held torch accepts all premix National tips listed below. To make this
torch into a bench torch, you will need a torch stand. See below, National TS191. Or, see the new National 6B, which has a built in stand. Torch has 1/4" hose barbs to connect to the cut ends of hose. Tips
and adapter sold separately. See below. |
CODE |
ITEM |
PRICE |
|
P-BUNA3A-B |
National 3A-B |
60.00 |
|
| |
|
|
|
NATIONAL 3B-B TORCH |
|
|
Premix. The same torch as the National 3A-B torch listed above, except the hoses connect
to the torch using standard "B" size fittings. See below, 12-1/2' BB hose set. Tips and adapter sold separately. See below. |
CODE |
ITEM |
PRICE |
|
P-BUNA3B-B |
National 3B-B |
65.00 |
|
NATIONAL TS191 TORCH STAND |
|
|
Heavy duty torch stand converts the National 3A-B and 3B-B into a bench torch. |
CODE |
ITEM |
PRICE |
|
P-BUNATS191 |
National TS191 |
37.50 |
|
| |
|
|
|
NATIONAL 6B TORCH |
|
|
Premix. Similar to the National 3A-B torch listed above, except instead of being a hand
held torch that requires a torch stand to use it as a bench torch, a swivel stand is built into the design. Torch has 1/4" hose barbs to connect to the cut ends of hose. Tips and adapter sold separately. See
below. |
CODE |
ITEM |
PRICE |
|
P-BUNA6BB |
National 6B-B |
78.00 |
|
| |
|
|
|
NATIONAL 8M TORCH |
|
|
Surface mix and premix in one. The 8M is a new specially designed bench torch that not
only lets you use all of Premier's premix tips, with the use of the PA1 adapter, but also accepts the new design surface mix tips directly. Tips and adapter sold separately. See below. |
CODE |
ITEM |
PRICE |
|
P-BUNA8M |
National 8M |
129.00 |
|
| |
|
|
|
NATIONAL PA-1 TORCH ADAPTER |
|
|
Add this adapter to the National 8M torch listed above to convert it into a premix
torch. Adapter accepts all premix National tips listed below. |
CODE |
ITEM |
PRICE |
|
P-BUNAPA1 |
National PA-1 |
39.00 |
|
| |
|
|
|
NATIONAL TORCH TIPS |
|
|
Surface mix tips for National 8M |
|
|
CODE |
ITEM |
PRICE |
|
P-NASM-5 |
SM-5, 7 Port small flame |
65.00 |
|
P-NASM-7 |
SM-7, 7 Port large flame |
65.00 |
P-NASM-21 |
SM-21, 30 Port |
85.00 |
| |
|
|
|
Premix tips for National 3A-B, 3B-B, 6B and 8M |
|
|
HUSH TIPS - Multi orifice tips for National 3A-B, 3B-B, 6B and 8M |
CODE |
ITEM |
PRICE |
|
P-NAHT-0 |
7 orifice .025 dia., on .093 bolt circle |
30.00 |
|
P-NAHT-1 |
12 orifice .025 dia., on .160 bolt circle |
32.00 |
P-NAHT-2 |
19 orifice .025 dia., on .263 hexagon pattern |
37.00 |
P-NAHT-3 |
31 orifice .025 dia., 6 on .353 diameter pattern |
42.00 |
P-NAHTC-0 |
HT-0 tip with .031 dia. center orifice |
32.00 |
P-NAHTC-1 |
HT-1 tip with .039 dia. center orifice |
34.00 |
P-NAHTC-2 |
HT-2 tip with .039 dia. center orifice |
39.00 |
P-NAHTC-3 |
HT-3 tip with .039 dia. center orifice |
44.00 |
| |
|
|
|
Single orifice tips for National 3A-B, 3B-B, 6B and 8M |
|
|
CODE |
ITEM |
PRICE |
|
P-NAOX-00 |
.020 diameter |
16.00 |
|
P-NAOX-0 |
.032 diameter |
14.00 |
P-NAOX-1 |
.042 diameter |
12.00 |
P-NAOX-2 |
.055 diameter |
9.00 |
P-NAOX-3 |
.070 diameter |
9.00 |
P-NAOX-4 |
.082 diameter |
9.00 |
P-NAOX-5 |
.100 diameter |
9.00 |
| |
|
|
|
Multi orifice tips for National 3A-B, 3B-B, 6B and 8M |
|
|
CODE |
ITEM |
PRICE |
|
P-NAHTM-0 |
7 orifice .031 diameter, 6 on .180 bolt circle |
30.00 |
|
P-NAHTM-1 |
9 orifice .040 diameter, 8 on .180 bolt circle |
30.00 |
P-NAHTM-2 |
9 orifice .049 diameter, 8 on .180 bolt circle |
30.00 |
P-NAHTM-3 |
9 orifice .055 diameter, 8 on .180 bolt circle |
30.00 |
| |
|
|
|
Carlisle Torches by Carlisle Machinery |
|
|
CARLISLE |
|
|
|
The Carlisle CC is available in a ball and post mounted version and a rack and pinion
mounted version. The CC is premix, single orifice center fire burner with a separately controlled 34 fuel port surface mix outer fire. |
Code |
Item |
Price |
|
P-BUCCRBP |
Carlisle CC Reg, Ball & Post |
932.00 |
|
P-BUCCRRP |
Carlisle CC Reg, Rack & Pinion |
1054.00 |
|
| |
|
|
|
CARLISLE CC PLUS |
|
|
The Carlisle CC Plus is available in a ball and post mounted version and a rack and
pinion mounted version. The CC Plus is a premix, single orifice center fire burner with a separate 63 fuel port surface mix outer fire. |
Code |
Item |
Price |
|
P-BUCCPBP |
Carlisle CC Plus, Ball & Post |
1535.00 |
|
P-BUCCPRP |
Carlisle CC Plus, Rack & Pinion |
1700.00 |
|
