ESSEMCE GLASSWORKING TOOLS

We are proud to announce that we are US distributors for Essemce glassworking tools and machinery. Essemce was established in Sweden over 50 Years ago. Essemce manufactures high quality tools and machinery for glassworks and studios, such as shears, jacks, a wide range of blowpipes, punties and gathering balls, belt finishers, blowpipe rollers, automatic stem pulling machine, centrifuges etc. Essemce makes many other glass machines that we do not stock. These machines can be viewed on our web site and can be special ordered from us. Please call for details. Items may be combined for quantity discounts: All shears may be combined, all blow pipes and punts may be combined, all blocks may be combined and all footing tools may be combined for quantity discounts.

BLOW PIPES & PUNTIES

Essemce blowpipes are available in four sizes with either brass or nylon mouth pieces. All are 54" long and come with rubber grips and steel collar.

Code	Item	1+	6+	12+	24+
P-GTE100	3/4" Pipe Nylon	116.00	104.40	98.60	92.80
P-GTE101	3/4" Pipe Brass	116.00	104.40	98.60	92.80
P-GTE150	1" Pipe Nylon	126.00	113.40	107.10	100.80
P-GTE151	1" Pipe Brass	126.00	113.40	107.10	100.80
P-GTE200	1 1/4" Pipe Nylon	132.00	118.80	112.20	105.60
P-GTE201	1 1/4" Pipe Brass	132.00	118.80	112.20	105.60
P-GTE250	1 1/2" Pipe Nylon	142.00	127.80	120.70	113.60
P-GTE251	1 1/2" Pipe Brass	142.00	127.80	120.70	113.60
P-GTE300	3/8" Punty	76.00	68.40	64.60	60.80
P-GTE301	1/2" Punty 1/2" Handle	76.00	68.40	64.60	60.80
P-GTE301A	1/2" Punty 9/16" Handle	76.00	68.40	64.60	60.80
P-GTE302	5/8" Punty	76.00	68.40	64.60	60.80
P-GTE303	3/4" Punty	76.00	68.40	64.60	60.80

 

DIAMOND SHEARS - GS SERIES

Essemce diamond shears are multi-purpose shears. The inside has a diamond shaped cutting area for cutting off round shaped additions. The ends of the blades have a curved section that does not have a cutting edge and is designed for holding and moving pipes and punties. In addition, the tip can also be used to hold and move round handles, etc. The outer tip of the shears are ground to a fine point which enables the shears to be used as tweezers for digging into and pulling on glass. Available in 4 sizes. Order N for normal handle, S for small handle.

Code	Item	1+	6+	12+	24+
P-GTESGS-1N	Shears GS-1N	99.00	89.10	84.15	79.20
P-GTESGS-1S	Shears GS-1S	99.00	89.10	84.15	79.20
P-GTESGS-2N	Shears GS-2N	99.00	89.10	84.15	79.20
P-GTESGS-2S	Shears GS-2S	99.00	89.10	84.15	79.20
P-GTESGS-3N	Shears GS-3N	99.00	89.10	84.15	79.20
P-GTESGS-3S	Shears GS-3S	99.00	89.10	84.15	79.20
P-GTESGS-4S	Shears GS-4S	138.00	124.20	117.30	110.40

 

SNUB NOSE SHEARS – SMC SERIES

Essemce snub nose shears are designed for trimming the lips of a vessel. They have blunt tips and are slightly curved to prevent the blades digging into the glass with the shear tips. These shears also minimize tooling marks and distortion of the lip. Available in 2 sizes. Order N for normal handle, S for small handle.

Code	Item	1+	6+	12+	24+
P-GTESMC-1N	Shears SMC-1N	87.00	78.30	73.95	69.60
P-GTESMC-1S	Shears SMC-1S	87.00	78.30	73.95	69.60
P-GTESMC-2N	Shears SMC-2N	93.00	83.70	79.05	74.40
P-GTESMC-2S	Shears SMC-2S	93.00	83.70	79.05	74.40

LONG NOSE SHEARS – SH SERIES

Essemce long nose shears have sharp, pointed blades that are designed for pulling out and cutting off small bubbles on a gather of glass. These shears make a clean cut leaving a smooth    surface on the glass. Available in 2 sizes. Order N for normal handle, S for small handle.

Code	Item	1+	6+	12+	24+
P-GTESSH-1N	Shears SH-1N	83.00	74.70	70.55	66.40
P-GTESSH-1S	Shears SH-1S	83.00	74.70	70.55	66.40
P-GTESSH-2N	Shears SH-2N	87.00	78.30	73.95	69.60
P-GTESSH-2S	Shears SH-2S	87.00	78.30	73.95	69.60

GENERAL PURPOSE SHEARS – KS SERIES

Essemce general-purpose shears are designed for general studio use. Can be used for cutting flattened bits of glass or cutting or manipulating hot bit additions. Available in 4 sizes. Order N for normal handle, S for small handle.

Code	Item	1+	6+	12+	24+
P-GTESKS-0N	Shears KS-0N	76.00	68.40	64.60	60.80
P-GTESKS-0S	Shears KS-0S	76.00	68.40	64.60	60.80
P-GTESKS-1N	Shears KS-1N	76.00	68.40	64.60	60.80
P-GTESKS-1S	Shears KS-1S	76.00	68.40	64.60	60.80
P-GTESKS-2N	Shears KS-2N	77.00	69.30	65.45	61.60
P-GTESKS-2S	Shears KS-2S	77.00	69.30	65.45	61.60
P-GTESKS-3N	Shears KS-3N	79.00	71.10	67.15	63.20
P-GTESKS-3S	Shears KS-3S	79.00	71.10	67.15	63.20

FOOTING TOOL

Essemce footing tool is designed to make perfect feet on gobblets and stemware. The top graphite plate flattens the foot with light thumb pressure while the spring-loaded lower graphite plate slides in the tool to prevent pushing the piece off center. The footing tool comes with a hook on the end for hanging on a bench. The footing tool is available in an under-work and over-work versions. They can also be used as left and right-handed tools. Available in 3 sizes. Order U for under-work, O for over-work.

Code	Item	1+	6+	12+	24+
P-GTEFS-3B	Footing Tool FS-3 Bottom Pl	31.00	27.90	26.35	24.80
P-GTEFS-3O	Footing Tool FS-3O	220.00	198.00	187.00	176.00
P-GTEFS-3T	Footing Tool FS-3 Top Plate	18.00	16.20	15.30	14.40
P-GTEFS-3U	Footing Tool FS-3U	220.00	198.00	187.00	176.00
P-GTEFS-4B	Footing Tool FS-4 Bottom Pl	36.00	32.40	30.60	28.80
P-GTEFS-4O	Footing Tool FS-4O	230.00	207.00	195.50	184.00
P-GTEFS-4T	Footing Tool FS-4 Top Plate	21.00	18.90	17.85	16.80
P-GTEFS-4U	Footing Tool FS-4U	230.00	207.00	195.50	184.00
P-GTEFS-50	Footing Tool FS-5O	241.00	216.90	204.85	192.80
P-GTEFS-5B	Footing Tool FS-5 Bottom Pl	41.00	36.90	34.85	32.80
P-GTEFS-5T	Footing Tool FS-5 Top Plate	24.00	21.60	20.40	19.20
P-GTEFS-5U	Footing Tool FS-5U	241.00	216.90	204.85	192.80

GLORY HOLE BURNERS

Essemce makes 4 type of glory hole burners for use with propane or natural gas.  The 16 port burner is for an Orrefors type 0 glory hole, with approximate dimensions of 10" x10" x 12". Burner dimensions (l x w x h) 7.0" x 2.5" x 4.5". The 30 port burner is for glory holes larger than the 16 port and smaller than the 60 port model. The 60 port burner is for an Orrefors type 1 glory hole dimensions: width from 14" to 20", height from 12" to 20", length from 20" to 25". Burner dimensions 12.2" x 4.33" x 5.51" The 90 port burner is for an Orrefors type 2 glory hole dimensions: 20"x20" x25". Burner dimensions 18.7" x4.3" x5.5". Burners can also be used in round glory holes of similar dimensions.

CODE

ITEM

1+

P-GTEGB16

Glory Hole Burner 16

270.00

P-GTEGB30

Glory Hole Burner 30

405.00

P-GTEGB60

Glory Hole Burner 60

569.00

P-GTEGB90

Glory Hole Burner 90

713.00

WOODEN BLOCKS

Essemce wood blocks are available in a variety of sizes. They come with out handles, so when the block wears out, you can just replace the block portion of the tool and re-use the handle. The handle is made of stainless steel and attaches with screws to the block. Handle sold separately. Made of alder wood.

Code	Item	1+	6+	12+	24+
P-GTEBL10	Essemce Block #10cm	60.00	54.00	51.00	48.00
P-GTEBL12	Essemce Block #12cm	70.00	63.00	59.50	56.00
P-GTEBL14	Essemce Block #14cm	82.00	73.80	69.70	65.60
P-GTEBL16	Essemce Block #16cm	87.00	78.30	73.95	69.60
P-GTEBL18	Essemce Block #18cm	95.00	85.50	80.75	76.00
P-GTEBL20	Essemce Block #20cm	106.00	95.40	90.10	84.80
P-GTEBL4	Essemce Block #4cm	49.00	44.10	41.65	39.20
P-GTEBL6	Essemce Block #6cm	50.00	45.00	42.50	40.00
P-GTEBL8	Essemce Block #8cm	53.00	47.70	45.05	42.40
P-GTEBLH	Essemce Block Handle	18.00	16.20	15.30	14.40

BLOWPIPE ROLLERS

Essemce makes 4 type of blowpipe rollers. The PS-1 is made to be mounted on a bench. It comes in two parts – one side with the power motor and one side for support.  Steplessly variable speed control with thrystor drive and dc motor. For two pipes approx. 5" apart. 110Volt. The PS-2 is a freestanding model for four pipes approx. 5" apart. Steplessly variable speed control with thrystor drive and dc motor. Can be adjusted vertically. Fitted with wheels for easy movement. The PS-3 is a freestanding model for heavier glass. For two pipes approx. 14" apart. Rubbered drive rollers. The support side is designed so that the pipes can be either placed above or below the support rollers.  Steplessly variable speed control with thrystor drive and dc motor. Fitted with wheels for easy movement. The PS-4 is a freestanding model for heavy glass for 4 blowpipes approx. 7" apart. Pipes can also be placed above or below the rollers for support. Steplessly variable speed control with thrystor drive and dc motor. Fitted with w

CODE

ITEM

1+

P-GTEPS-1

Blowpipe Roller PS-1

1175.00

P-GTEPS-2

Blowpipe Roller PS-2

1695.00

P-GTEPS-3

Blowpipe Roller PS-3

1695.00

P-GTEPS-4

Blowpipe Roller PS-4

1875.00

BLOWPIPE COOLING MACHINE

The Essemce blowpipe cooling machine must be connected to a water supply. By placing a blowpipe in the machine you automatically open a valve and the pipe is cooled with water from 5 spray nozzles. When you remove the pipe, the valve is automatically closed. Height 35". Special order item – please call for details.

CODE

ITEM

1+

P-GTEBC-1

Blowpipe Cooler

715.00