SMIRICH MARBLE CUP |
|
The Smirich Marble Cup resembles an egg cup. The handle is located where you would
expect to find the stem and base of the egg cup. Because of the unique design, you cna from the marble by moving around and twirling the marble cup over the glass as you make the marble instead of moving the
marble around in the cup as you do in a conventional mold. As with all graphite tools, graphite can be used as-is. The brass Marble cup should be used with bees wax. |
Code |
Item |
Price |
P-SMIRMCG58 |
Smirich Graphite Marble Cup 5/8" |
30.00 |
P-SMIRMCG34 |
Smirich Graphite Marble Cup ¾" |
30.00 |
P-SMIRMCG78 |
Smirich Graphite Marble Cup 7/8" |
30.00 |
P-SMIRMCG1 |
Smirich Graphite Marble Cup 1" |
30.00 |
P-SMIRMCB78 |
Smirich Brass Marble Cup 7/8" |
40.00 |
P-SMIRMCB114 |
Smirich Brass Marble Cup 1 ¼" |
45.00 |
| |
|
|
GRAPHITE BOWL PUSH |
|
Used to push a bowl shape into blown glass and place an optional hole in the center. A
5/8" diameter, cylindrical shaped graphite is rounded like a ball at the end. At the center of the ball shaped area there is a pointed, 3/32" tungsten rod that sticks out. The tungsten rod's length can be
adjusted quickly and easily. The wood handle model has a contoured 4" wood handle. The metal handle model has a 7/16" diameter by 6½" long aluminum handle. |
Code |
Item |
Price |
P-GBOWL1 |
Graphite Bowl With wood handle |
35.00 |
P-GBOWL2 |
Graphite Bowl With metal handle |
40.00 |
| |
|
|
GRAPHITE PUFFER |
|
Used to expand the shape of a goblet, tumbler, jar or similar shape. The puffer will fit
any opening from ¼" to 2". The back of the cone shaped graphite has a 12" long, ¼" diameter metal tubing extending straight back for blowing air through. Using care, the special tubing can be bent to an
angle without kinking to accommodate your special needs. |
| |
|
|
Code |
Item |
Price |
P-GPUFFER |
Graphite Puffer |
35.00 |
| |
|
|
EMIKO'S BIG GLASS HOLE MANDREL |
|
Used to make large holes in glass beads, rings, and sculpture or for core formed
vessels. A large diameter stainless rod, 2" long with a 5/32" diameter (slightly larger than 1/8") mandrel attached as a handle. The total length is 12". The handle is thin enough to make
quicker rotations and marvering easier than if the whole tool was the same diameter as you would have if you were to use tubing, yet thick enough to make it hard to bend. Also, unlike tubing, you do not need
to worry about moisture getting trapped in the handle and burning you. The large diameter stainless rod is cored out 7/8 of its 2" length to make it lighter. The end or the large diameter rod is solid so
that the cored out area does not fill up when it dipped in mandrel release. |
Code |
Item |
Price |
P-MAN-E38 |
Emiko Big Hole Mandrel 3/8" |
10.00 |
P-MAN-E716 |
Emiko Big Hole Mandrel 7/16" |
11.00 |
P-MAN-E12 |
Emiko Big Hole Mandrel 1/2" |
11.00 |
P-MAN-E58 |
Emiko Big Hole Mandrel 5/8" |
12.00 |
P-MAN-E916 |
Emiko Big Hole Mandrel 9/16" |
12.00 |
P-MAN-E1116 |
Emiko Big Hole Mandrel 11/16" |
13.00 |
P-MAN-E34 |
Emiko Big Hole Mandrel 3/4" |
13.00 |
P-MAN-E1316 |
Emiko Big Hole Mandrel13/16" |
14.00 |
P-MAN-E78 |
Emiko Big Hole Mandrel 7/8" |
14.00 |
P-MAN-E1516 |
Emiko Big Hole Mandrel 15/16" |
15.00 |
P-MAN-E1 |
Emiko Big Hole Mandrel 1" |
15.00 |
P-MAN-E114 |
Emiko Big Hole Mandrel 1 1/4" |
18.00 |
P-MAN-E112 |
Emiko Big Hole Mandrel 1 1/2" |
20.00 |
