|
|
 |
|
|
 |
|
|
|
CARBON RODS |
|
|
|
Highest quality grade available. Stronger, smoother finish and finer grain. Used as
reamers, shapers, pokers, holders, marvers, etc. Can be sharpened like a pencil or carve designs into it and press into hot glass. 12" long |
CODE |
ITEM |
Price |
|
P-CAR18 |
1/8" x 12" Carbon Rod |
1.00 |
P-CAR532 |
5/32" x 12" Carbon Rod |
1.00 |
P-CAR316 |
3/16" x 12" Carbon Rod |
1.00 |
P-CAR14 |
1/4" x 12" Carbon Rod |
1.25 |
P-CAR38 |
3/8" x 12" Carbon Rod |
2.25 |
P-CAR12 |
1/2" x 12" Carbon Rod |
3.25 |
P-CAR58 |
5/8" x 12" Carbon Rod |
4.25 |
P-CAR34 |
3/4" x 12" Carbon Rod |
5.00 |
P-CAR78 |
7/8" X 12" Carbon Rod |
6.00 |
P-CAR1 |
1" x 12" Carbon Rod |
7.00 |
| |
|
|
|
STUMP SHAPER |
|
|
|
Designed for glass bead sculptural genius, Loren Stump, to aid him in producing the
incredible detail and definition he has become so famous for. One 2" side has a radius on its edge. The opposite side has a 1/4" radius that tapers to a point at the end of the paddle where the
corner of the paddle is rounded. The end of the paddle is machined to a knife edge. Coined as the "STUMP SHAPER", you will find that this will be a most valuable tool in creating your own sculptural beads
and murrinis. |
CODE |
ITEM |
Price |
|
P-STUMP1 |
2" x 2" Graphite Shaper |
30.00 |
|
P-STUMP2-SM |
Stump Brass Shaper - Import |
35.00 |
P-STUMP2-LG |
Stump Brass Shaper - USA |
50.00 |
| |
|
|
|
STUMP SUCKER |
|
|
|
Stump Sucker with hose set. Used to vacuum case small glass sculptures that can be used
for beads, buttons, small sculptures, marbles, and small paper weights as well as for making components in large paper weights and large sculptures. To use, place your glass setup in the bottom of the
tapered graphite hole. At the bottom of the hole is a perforated graphite disk. Heat up the glob of glass in the torch or gather glass from a crucible. Heat the setup with a micro torch to prevent fine
bubbles from forming on the surface. Be careful not to over heat and distort hte setup. Place the moltem glass over the hole. You need to keep the molten glass rather spherical while it seals the hole and
begins to drop into the hole. Immediately suck on the hose. When done properly, the molten glass will completely fill in around the setup. Requires advanced skill levels. |
CODE |
ITEM |
Price |
|
P-STUMP3 |
1 Hole Stump Sucker 3/4" (w/o hose) |
50.00 |
|
P-STUMP3A |
1 Hole Stump Sucker 1" (w/o hose) |
50.00 |
P-STUMP4 |
1 Hole Stump Sucker 1 1/4" (w/o hose) |
50.00 |
P-STUMP6 |
1 Hole Stump Sucker 1 1/2" (w/o hose) |
50.00 |
P-STUMPH |
Hose and Filter |
10.00 |
|
|
